Seals concrete and masonry structures such as drinking water tanks (the product is approved for this use), swimming pools, swimming pools, basins, buried basements, lift pits, car parks, water treatment plants, tunnels , sewer network.
Consumption varies according to the roughness of the support (up to 3.5 kg of powder per m2 for two coats).
- Intended for sealing concrete and masonry structures such as drinking water tanks or basins.
- For all non-smooth mineral substrates: cementing, blocks, frosted tiles, etc.
- Used to seal concrete and masonry structures such as drinking water tanks (the product is approved for this use), swimming pools, swimming pools, basins, buried basements, lift pits, car parks, water treatment plants , tunnel, sewer network
Application
- Before application check that the support is damp but not dripping.
- Do not work in the rain and wait at least 1 day between the 2 coats.
- Always round the re-entrant corners (load with cement) and the outer corners (break them with the grinder).
- For a smooth finished appearance, it is necessary to put a 3rd coat and smooth it. There is no maximum time between 2 layers but always ensure that the layer before application is clean (pressure cleaning if necessary).
- During application, if the product adheres poorly: wet the support. Cemaqua is prepared like a fairly liquid cement and applied with a specific brush.
- Application in at least two coats requires at least 2.5 kg of powder per m2.
- Consumption varies according to the roughness of the support (up to 3.5 kg of powder per m2 for two coats).
