The Crystal Clear Water Pack — 3 products, 1 goal: healthy water all summer long
Heat, intensive feeding, pressurized filtration: summer puts your pond to the test. This pack combines 3 complementary products, each targeting a different cause of imbalance — for clear, stable, and healthy water for your fish.
The order of application is important: always start by stabilizing the water’s mineral base with Aquipond MinerAll In One before using the other two products. Well-mineralized water allows BactoClay and ClearWater to work optimally and sustainably — without this, their effect fades faster.
1. Aquipond MinerAll In One — the essential base before any treatment
Why start with this product? A pond filled or topped up with rainwater naturally lacks minerals. Without a stable mineral base, pH fluctuates, algae find it easier to thrive, and subsequent treatments lose effectiveness. MinerAll In One restores this balance before moving further.
- Simultaneously stabilizes GH and KH
- Helps to sustainably stabilize pH
- Supports the activity of biological filter bacteria
- Naturally limits conditions favorable to algae
Dosage and use
| Packaging |
2.5 kg bucket — treats up to 30 m³ |
| Reference dosage |
100 g for 1,500 liters of water |
| At startup or after imbalance |
2 applications per month |
| For maintenance |
1 application per month |
| Instructions for use |
Distribute directly over the entire surface of the pond, or dissolve in a bucket of water before pouring evenly |
Composition: blend of natural minerals (magnesium, silicon, sodium, iron, manganese). Suitable for ornamental ponds, koi ponds, and natural ponds.
2. Aquipond BactoClay — protects your koi from the inside
Once the mineral base is stabilized, BactoClay works deeply: this ultra-pure montmorillonite clay captures toxins present in the water while reinforcing your koi’s first line of defense — their protective mucus.
- 86% pure montmorillonite — the highest concentration on the market
- Ultra-fine granularity (< 50 microns) for rapid and even dispersion
- Captures heavy metals, toxins, and suspended particles
- Strengthens the protective mucus and boosts koi immunity
- 100% natural, chemical-free
Dosage and use
| Packaging |
2 kg — treats up to 50 m³ |
| First use |
100 g per m³ of water |
| For maintenance |
50 g per m³, every 2 to 4 weeks depending on water quality |
| To know |
A slight turbidity may appear 24 to 48 hours after addition — this is normal, the water quickly regains its clarity |
Compatibility: BactoClay can be used with nitrifying bacteria and most pond products. Avoid simultaneous use with chemical flocculants.
3. Aquipond ClearWater — the clarifier that completes the treatment
Final step: ClearWater visually removes phosphates, impurities, and suspended matter for a crystal-clear pond — a result that lasts longer when the water has already been stabilized and purified by the two previous products.
- Eliminates phosphates, impurities, and suspended matter
- Optimizes mechanical filtration
- Acts quickly, even on brown, green, or whitish water
- Harmless to the pond’s flora and fauna
Dosage and use
| Packaging |
Treats up to 25 m³ |
| Before treatment |
Slow down the pump and stop aeration to allow sedimentation |
| Application |
Dilute the dose at least 10 times with water, then spread over the entire surface of the pond (using a watering can) |
| After treatment |
Remove accumulated debris, restart the pump, and aerate well |
| Frequency |
Allow a 10-day interval between 2 treatments |
⚠️ Important precaution: do not use ClearWater if the dissolved oxygen level is already low (high heat, storm) — the increased bacterial activity following treatment can temporarily lower oxygen. Make sure your aeration is working well before application.
Why these 3 products work better together
| Step |
Product |
Role |
| 1 |
MinerAll In One |
Stabilizes the mineral base (GH/KH/pH) — a condition for the other two products to act sustainably |
| 2 |
BactoClay |
Captures toxins and protects your koi from the inside |
| 3 |
ClearWater |
Visually clarifies the water once the biological balance is restored |
Frequently Asked Questions
In what order should the 3 products be used?
Always start with MinerAll In One to stabilize the water, then BactoClay, and finally ClearWater for the final visual clarification.
Can all three be used on the same day?
It is best to space out applications by a few days between each product, especially before ClearWater, to allow time for the biological balance to stabilize.
Is this pack suitable for all ponds?
Yes — koi ponds, garden ponds, natural ponds, as long as the treated volume matches the capacities indicated for each product (up to 25-50 m³ depending on the product).
