DAB JETInox 83-132 M CONTROL-D
Description
Self-priming pump with a cast-iron pump body; stainless steel, suitable for rainwater use. Automatic control via a CONTROL-D with variable direction, with integrated dry-run protection. Integrated thermal protection and permanently switched-on capacitor. A non-return valve or foot valve is required on the pump's suction side. CONTROL-D is an electronic device for controlling and protecting domestic pumps without a diaphragm tank. CONTROL-D can start and stop the pump and shut it down in the event of a water shortage, using its integrated flow and pressure measurement. Easy to install on the pump. The pump starts automatically when one or more taps are opened.
As long as water is being used, the pump continues to operate, ensuring constant pressure. When the tap is closed, the pump stops after approximately 10 seconds. In the event of a water shortage, the pump stops and a red indicator light (fault) comes on. When water is available again, you can use the reset button to restart the pump.
Operating range
Jet / Jetinox from 0.4 to 10.5 m³/h with a delivery head of up to 62 metres. Euroinox from 10 to 120 l/min, with a delivery head of up to 72 m. Liquid temperature range: from 0°C to +35°C for domestic use, and from 0°C to +40°C for other uses. Clean liquid to be pumped, free of solids and mineral materials, non-viscous, non-aggressive, non-crystallised and chemically neutral. Maximum ambient temperature +40°C. Maximum operating pressure 6 bar (600 kPa) for Jet and Jetcom, and 8 bar (800 kPa) for Jetinox / Euroinox. Protection rating: IP 44 (terminal block protection IP 55). Insulation class F. All pumps have 1" connections.