This pack combines an OASE water feature pump and the Volcan 37-2.5K nozzle, with the TE10K telescopic extension, allowing you to create your water jet in a single order.
The effect achieved
The Volcan 37-2.5K nozzle projects 37 fine jets (Ø 2.5 mm) spread over 3 levels. Upon reaching the top, the jets turn into fine droplets and fall back in multiple streams: the whole evokes a volcanic eruption.
Jet height and diameter
Height of approximately 3.7 m, falling diameter of approximately 2.2 m.
Indicative value, not guaranteed: OASE does not publish data for this nozzle with the Aquarius Eco Premium 9500. It is taken from OASE data for a pump of equivalent flow rate (Aquarius Universal Premium 9000). The actual height depends on the flow setting, the length of the extension, and the installation depth.
For which pond?
This pack is suitable for a large pond. Allow for a body of water significantly wider than the falling diameter (2.2 m) so that the water stays in the pond. Choose a location sheltered from the wind: fine jets and high jets are blown by gusts and the water can leave the pond.
Pack contents
Our experts' advice
The Aquarius Eco Premium pump is delivered without a nozzle or extension: the included TE10K telescopic extension (280 to 510 mm) allows you to place the nozzle just above the water surface. Place the pump on a stable support, away from sludge, and clean its strainer regularly. The flow is electronically adjustable: start with a reduced flow and then increase until the desired effect is achieved.