For which body of water?

The Flostyle 3CV is at the top of the Flostyle range, designed and manufactured in France by Faivre for ornamental ponds, parks, golf courses, and municipal bodies of water. Its motor drives a turbine that shoots water into a decorative jet: as the water falls back, it becomes aerated, and surface agitation reduces areas of stagnant water.

The right power depends on the surface area and depth of your body of water, the desired visual effect, and the electrical supply available on site. The entire range is available in the shop:

Unsure which power to choose? Send us the surface area, depth, and a few photos of your body of water: our experts will guide you.

Installation

1. Check the electrical supply available at the water's edge (single-phase or three-phase) and select the corresponding version with your desired jet style.
2. Have the electrical connection carried out by an electrician, with the required protections for a device installed in water.
3. Choose an open location, far enough from the banks so that the jet always falls back into the body of water, even in windy conditions.
4. Place the device in the water and secure it with moorings or anchors so that it does not drift.
5. Run the cable to the electrical box, protecting it along the way, then turn it on and check the shape of the jet.

Recommended additions

• Aquipond Bactovase 25 kg: microorganisms that break down the organic matter in sludge; well-agitated water is beneficial for them.
• Aquipond Bactolake 5 kg: bacteria for natural ponds, dosed at the surface (5 kg for 5,000 m²).
• Flosub 1CV: floating surface aerator providing high oxygen input, complementing the decorative jet.

Have a question before ordering? The Foudebassin team, experts since 1998, is here to help: support@foudebassin.com or +32 10 86 03 54.