New products

Rainbird PSI-M30 pressure regulator 2.1 bar Description These pressure regulators were developed specifically for drip irrigation and ensure a cons...

Rainbird PSI-M25 pressure regulator 1.8 bar Description These pressure regulators were developed specifically for drip irrigation and ensure a cons...

Rainbird PSI-M20 pressure regulator 1.4 bar Description These pressure regulators were developed specifically for drip irrigation and ensure a cons...

Stake for 20 mm dripline Description This sturdy stake keeps the dripline securely in place!

Stake for 16 mm dripline Description This sturdy stake keeps the dripline securely in place!

Mtr pressure-compensating PE16 drip hose 100 meters Description 16 mm PE dripline with an integrated pressure-compensating dripper. Regardless of t...

Inline 16 and 20 mm dripline - Irrigation hose with integrated drippers Description PE hose with integrated dripper and a special labyrinth system...

Hunter RZWS 25 cm with 0.9 l/min bubbler Description Young plants and trees need the right amount of water, oxygen, and nutrients throughout the ro...

Hunter RZWS 45 cm with 0.9 l/min bubbler and check valve Description Young plants and trees need the right amount of water, oxygen, and nutrients t...

Hunter RZWS 90 cm with 0.9 l/min bubbler Description Young plants and trees need the right amount of water, oxygen and nutrients throughout the roo...

3-way 1” female thread x 1” male thread cross Description Black plastic parts for assembling a manifold intended for irrigation, watering templates...

1” male thread x ¾” male thread socket Description Black plastic parts for assembling a manifold intended for irrigation, watering templates and ca...

1” male thread x 1” male thread socket Description Black plastic parts for assembling a manifold intended for irrigation, watering templates and ca...

4-way 1" female manifold Description Complete manifolds with rubber sealing ring. Secured with a 32 mm pipe clamp. 1" female thread.

1" female 3-way distributor Description Complete distributors with rubber sealing ring. Mounting with a 32 mm pipe flange. 1" female thread.

1" female 2-way distributor Description Complete distributors with rubber sealing ring. Mounting with a 32 mm pipe flange. 1" female thread.

Type Y control power cable - Control cable for irrigation system Description The type Y control power cable is intended for the connection and elec...

3-meter cable connector Description - Quickly connect cables with a crocodile wrench, - No unnecessary wire stripping, - Maximum operating temperat...

Type Y control power cable - Control cable for irrigation system Description The type Y control power cable is intended for the connection and elec...

Cepex Riser for square inspection box 255 x 382mm Description The Cepex riser for square inspection box 255 x 382 mm is an accessory designed to in...

Cepex Square Inspection Box 340 x 503mm Description The Cepex Square Inspection Box 340 x 503 mm is an inspection box designed to facilitate access...

Cepex Square Inspection Box 255 x 382mm Description The Cepex Square Inspection Box 255 x 382 mm is designed to create an access point to irrigatio...

Water outlet riser - Extension for irrigation inspection box Description The water outlet riser is an accessory designed to increase the height of ...

Square water outlets - Square inspection box for irrigation installation Description The body is made of black polypropylene and the cover is made ...

Inspection box with ¾" valve Description Plastic body with ¾" brass tap. Ideal for installing sampling points in the garden.

¾ Automatic Valve Description This valve has a flap that opens by inserting the key below. The shut-off valve is green.

Cepex Round Well Ø231 mm Description The Cepex Round Well Ø231 mm is designed for irrigation systems and hydraulic networks requiring access to equ...

Cepex Round Inspection Well Ø205 mm Description The Cepex round inspection well Ø205 mm is designed to facilitate access to equipment in an irrigat...

Cepex Round Well Ø147.5 mm Description The Cepex Round Well Ø147.5 mm is designed for the installation and access of irrigation systems. Its round ...

Round water intakes - Fittings and water access points for hydraulic installation Description The body is made of black polypropylene, and the cove...

¾"-1" female thread without FC Description Cepex solenoid valves are made of reinforced nylon. Operating pressure from 0.7 to 10 bar. Minimum flow ...

Total freedom, no cable. Completely cordless, the Zodiac Pixel OP-Li 2100 pool cleaner is very lightweight and easy to operate thanks to its simple...

Thanks to its patented cyclonic suction, the Zodiac Voyager RE 4100 robot is suitable for all types of pool surfaces. Its integrated sensors, such ...

Thanks to its patented cyclonic suction, the Zodiac CNX 10 robot is suitable for all types of pool surfaces. Its integrated sensors, such as the gy...

Robots in the Vortex 4WD range feature Zodiac's patented cyclonic suction, which is extremely powerful and consistent. Equipped with four-wheel dri...

The Alpha iQ range's electric pool cleaner, the Alpha iQ RA 6700 is equipped with the Sensor Nav System: it analyzes the pool's configuration to op...

Original AstralPool handle for the quartz glass sleeve of TL UV-C units. It makes handling and installing the quartz sleeve easier. Highlights Ori...

Original quartz glass sleeve with its two O-rings, for the Sicce Green Reset 25 pressurized filter. Replace it if it is cracked, scratched, or clou...

Original O-ring ensuring the quartz sleeve is watertight on AquaForte UV-C units and BCF, UBF 18.000/25.000, and PF-40 filters. Replace whenever th...

Original quartz glass sleeve for AquaForte CBF pressure filters equipped with a 36 W UV-C lamp. Replace if cracked, scratched, or cloudy. Highlight...

Original quartz glass sleeve for the AquaForte UBF-12.000 filter with a PL UV-C lamp. Replace if cracked, scratched, or cloudy. Highlights Origina...

Original quartz glass sleeve for AquaForte CBF pressure filters equipped with an 18 or 24 W UV-C lamp. Replace it if it is cracked, scratched or cl...

Original quartz glass sleeve for the 11 W UV-C lamp of the AquaForte CBF-8000 pressure filter. Replace if cracked, scratched, or cloudy. Highlights...

Original quartz glass sleeve for the 9 W UV-C lamp of the AquaForte CBF-4000 pressure filter. Replace it if it is cracked, scratched or cloudy. Key...

Original quartz glass sleeve for the AquaForte GPF 15,000 pressure filter. It protects the UV-C lamp from the water while allowing the radiation to...

Original quartz glass sleeve for the AquaForte GPF 20,000 pressure filter. It protects the UV-C lamp from the water while allowing the radiation to...

Genuine quartz glass sleeve for the AquaForte GPF 10.000 pressure filter. It protects the UV-C lamp from the water while allowing the radiation to ...

Genuine quartz glass sleeve for the AquaForte GPF 5.000 pressure filter. It protects the UV-C lamp from the water while allowing the radiation to p...