It is an aerator that agitates the entire body of water by means of large-scale circulation and a mushroom-shaped fountain. This floating aeration system will reduce algae, enrich the body of water with oxygen and limit its eutrophication (silting, odors, excess nutrients in the water, etc.).
Several advantages result from this:
- High oxygen supply
- Expulsion of harmful gases
The ripples and oxygen supply created disturb the surface of the water, thus preventing the significant formation of algae.
- 250W - Active Zone 15M diameter - 75CM depth 75M³/H
- 400W - Active Zone 20M diameter - 75CM depth 120M³/H
- 550W - Active Zone 25M diameter - 75CM depth 150M³/H
- 750W - Active Zone 35M diameter - 75CM depth 240M³/H
Aquitechnics floating aerators discharge water upwards, like a fountain, creating an attractive water feature. The water is circulated using a propeller. The jet's trajectory angle and its impact on the water surface improve the exchange of gases with the outside air.
All this promotes a healthy fish population. The expulsion angle has been chosen so that the waves propagate from the aerator, distributing the oxygenated water throughout the pond. This prevents stagnant areas with low oxygen. This flow of water away from the device also ensures that the aerator always draws oxygen-poor water from below, circulates it and enriches it with oxygen. The expulsion angle prevents any short-circuit flow.
There are two types of aerators: with a surface motor and with a submersible motor. Both types are almost identical in terms of performance, oxygen enrichment and energy consumption. The submersible motor model produces a lower and rather wider water fountain, while the surface motor version produces a taller but narrower fountain.
Only the version with submersible motor is suitable for use as winter protection (to reduce ice formation for example).
The aerators are supplied ready to use and are supplied with a cable and motor protection device. All protection baskets, fittings, motor shafts and screws are made from rust-resistant materials.
The high-performance electric motor of this type of aerator is housed, with its long stainless steel shaft, in a polyethylene housing on the float above the water surface. From the outside, the insulated motor operates silently, and only the murmur of the stimulated water can be heard.
