Aquipond Boost & Clean – The pond’s biological deep clean
Over the weeks, fallen leaves, leftover food, fish waste, and organic matter accumulate on the bottom of the pond.
This invisible pollution does not disappear on its own. Gradually, it promotes the formation of a layer of sludge, slippery walls, and biofilm, consumes available oxygen, clogs the filtration system, and naturally disrupts the ecosystem.
The consequences are often the same: water that is more difficult to keep clear, more maintenance, a filter that becomes clogged more quickly, and a pond that gradually loses its balance.
Aquipond Boost & Clean was developed to act directly on this organic pollution. As soon as it is applied, it helps loosen accumulated deposits, encourages them to rise toward the surface so they can be easily removed, and prepares the bottom of the pond for more effective biological digestion.
Because the best waste is waste that permanently leaves your pond.
Why choose Aquipond Boost & Clean?
- Loosens accumulated organic matter
- Encourages them to rise toward the surface
- Makes their permanent removal easier
- Helps gradually limit biofilm development
- Improves oxygen exchange at the bottom
- Reduces the organic load present in the pond
- Prepares the ground for beneficial bacteria
- Compatible with biological filtration systems
- Suitable for ornamental ponds, koi ponds, lakes, and natural swimming pools
An action in 3 steps
🚀 1. Loosen the waste
Aquipond Boost & Clean acts quickly on accumulated organic deposits.
The lightest particles gradually detach from the bottom and naturally rise toward the surface.
Every piece of waste collected is pollution permanently removed from the pond.
💧 2. Clean the bottom
By gradually reducing organic deposits, Aquipond Boost & Clean helps limit the development of the biofilm covering the walls, stones, and bottom of the pond.
This action also improves oxygen exchange at the substrate level and promotes a healthier environment.
🦠 3. Prepare the biological balance
Once cleaning is complete, the bottom of the pond becomes more favorable to the development of beneficial bacteria.
To prolong the treatment’s effects over time, follow up with Aquipond Bacto Maintenance, which contributes to the natural digestion of residual organic matter.
What to expect after application?
⏱ Within the first few minutes
The product begins to act on the organic matter present in the pond.
🌊 Between a few hours and 24 hours
The first waste gradually rises toward the surface.
Remove them regularly to prevent them from settling back on the bottom of the pond.
💨 In the following days
A slight foam or temporary cloudiness may appear in the water.
This is perfectly normal and gradually disappears.
🌿 Then
Complete the treatment with Aquipond Bacto Maintenance to maintain long-lasting biological activity.
Maximize the treatment's effectiveness
Aquipond Boost & Clean is designed to bring a significant portion of organic matter to the surface.
To achieve the best results, it is essential to remove this waste as soon as it appears.
👉 A fine-mesh net will effectively collect the lightest particles.
👉 A surface skimmer will automatically make it easier to remove a large proportion of floating waste.
The faster organic matter is removed, the less of it will return to the bottom of the pond.
This step is what makes it possible to achieve truly long-lasting cleaning.
When should you use Aquipond Boost & Clean?
🌱 In spring, after winter
🍂 After a significant fall of leaves
🧹 When the bottom starts to become muddy
💧 When the filtration becomes clogged quickly
🌿 When the sides become slippery
♻️ Several times during the season for maintenance
Aquipond Boost & Clean dosage
Recommended treatment
30 g per m³ of water (30 g per 1,000 litres).
In the event of significant pollution, the treatment can be repeated, provided that a minimum of 15 days is allowed between applications. Every piece of waste removed with a net is pollution that will never return to the bottom of your pond.
Instructions for using Boost & Clean
- Make sure the pond is properly circulated and that the filtration is operating normally.
- Check the water parameters (pH, GH and KH) before application.
- As soon as the water temperature exceeds 15°C, distribute Aquipond Boost & Clean evenly over the entire surface of the pond.
- Keep the filtration and aeration systems running.
- Regularly remove waste that rises to the surface.
- A slight foam or temporary cloudiness may appear in the water: this is normal and temporary.
- Allow a minimum of 15 days between two treatments.
Advice from the Aquipond experts
💨 Good oxygenation considerably improves the treatment's effectiveness.
🍂 The faster the waste brought to the surface is removed, the better the result.
🦠 After cleaning, use Aquipond Bacto Maintenance to maintain optimal bacterial activity.
💡 If you use bacteria, follow the product's instructions for use, particularly regarding the temporary shutdown of UV lamps.
The Aquipond method
At Aquipond, we are convinced that a sustainably balanced pond never depends on a single product.
The best results are achieved by combining:
- effective oxygenation;
- properly sized filtration;
- regular removal of organic matter;
- selected bacteria;
- preventive maintenance throughout the season.
This holistic approach helps maintain clear water, a cleaner bottom, and a sustainably balanced aquatic ecosystem.
The ultimate active-oxygen boost for a healthier pond
When temperatures rise and dead leaves, leftover food, fish excrement, or organic deposits accumulate, certain areas of the pond quickly become oxygen-depleted.
These areas, often located at the bottom of the pond, in lava-rock filters, constructed wetlands, or planted filters, encourage the development of unpleasant odors, the accumulation of organic matter, and biological imbalance in the ecosystem.
Aquipond Boost & Clean gradually releases active oxygen to truly revitalize your pond. Its action promotes oxygenation in the most heavily soiled areas, helps loosen organic deposits, and naturally supports the activity of beneficial bacteria, without leaving harmful residues after use.
Why choose Aquipond Boost & Clean?
💧 Quickly provides an extra supply of active oxygen when the pond needs it most.
🌿 Naturally stimulates the activity of beneficial bacteria, which are essential for lasting biological balance.
✨ Helps loosen organic deposits present on the bottom, walls, rocks, and filter media.
🌱 Reoxygenates critical areas such as lava-rock filters, planted filtration beds, constructed wetlands, or poorly circulated areas.
🦠 Helps limit conditions favorable to anaerobic zones, which are often responsible for unpleasant odors and certain biological imbalances.
💎 Helps create clearer, fresher water and a visibly cleaner pond.
🎨 Effectively removes residual purple discoloration after treatment with potassium permanganate.
🐟 Respects fish, aquatic plants, and the pond's natural balance when used according to the recommended dosage.
💡 Advice from Aquipond bioengineers
During hot weather, after treating the pond, thoroughly cleaning the filter, or when significant organic deposits are present, Aquipond Boost & Clean provides the extra oxygen the pond needs to quickly restore optimal biological conditions.
