1 SubFlo Base 2 D avec compresseur SAD 120, 2 SubFlo Diffuser D, 1 Tubing L 30 m (de la base au bord de l'eau) et 1 Tubing H lesté de 30 m ou 150 m selon la variante choisie.
Quelle surface peut-on aérer ?
Jusqu'à 8 000 m², selon la profondeur et la forme du plan d'eau, pour une profondeur de 2 à 10 m.
30 m ou 150 m de tuyau lesté ?
Le 30 m convient quand les diffuseurs sont près du bord (environ 15 m chacun). Le 150 m s'impose quand ils doivent être placés loin de la rive (environ 75 m chacun). Envoyez-nous un plan, nous calculons les distances.
Faut-il lester les diffuseurs ?
Oui. Les diffuseurs sont livrés vides et se lestent sur place avec du gravier ou du sable. Le Tubing H, lui, est lesté et coule seul.
Quand vais-je recevoir ma commande ?
Le délai d'expédition est indiqué sur la fiche, juste au-dessus du bouton d'achat. Dès le départ du colis, vous recevez par e-mail le lien de suivi du transporteur. Le temps de transport dépend du pays et du volume du colis (les envois sur palette prennent plus de temps).
1 SubFlo Base 2 D avec compresseur SAD 120, 2 SubFlo Diffuser D, 1 Tubing L 30 m (de la base au bord de l'eau) et 1 Tubing H lesté de 30 m ou 150 m selon la variante choisie.
Quelle surface peut-on aérer ?
Jusqu'à 8 000 m², selon la profondeur et la forme du plan d'eau, pour une profondeur de 2 à 10 m.
30 m ou 150 m de tuyau lesté ?
Le 30 m convient quand les diffuseurs sont près du bord (environ 15 m chacun). Le 150 m s'impose quand ils doivent être placés loin de la rive (environ 75 m chacun). Envoyez-nous un plan, nous calculons les distances.
Faut-il lester les diffuseurs ?
Oui. Les diffuseurs sont livrés vides et se lestent sur place avec du gravier ou du sable. Le Tubing H, lui, est lesté et coule seul.
Quand vais-je recevoir ma commande ?
Le délai d'expédition est indiqué sur la fiche, juste au-dessus du bouton d'achat. Dès le départ du colis, vous recevez par e-mail le lien de suivi du transporteur. Le temps de transport dépend du pays et du volume du colis (les envois sur palette prennent plus de temps).
You can select our different delivery options at the cart stage. We deliver with BPOST & DPD. For bulky packages, these are delivered by GEODIS or by us.
A passionate team at your service
Foudebassin is a team of enthusiasts dedicated to pond services.
Tout le matériel pour aérer par le fond un plan d’eau profond jusqu’à 8 000 m² : base, 2 diffuseurs et tuyaux
2 points d'aération au fond
2 diffuseurs SubFlo Diffuser D libèrent des bulles ultra-fines là où l'oxygène manque, et brassent toute la colonne d'eau.
Compresseur SAD 120
Jusqu'à 120 L d'air par minute en fonctionnement continu (500 W).
Silencieux, invisible en surface
La base s'installe au sec sur la rive ; seuls les diffuseurs sont au fond, rien ne se voit à la surface.
Installation complète
Tubing L 30 m de la base au bord de l'eau, puis Tubing H lesté (30 m ou 150 m) découpé en une longueur par diffuseur.
5 % d'économie
Le pack coûte 5 % de moins que les mêmes articles achetés séparément.
Idéal pour
Plans d'eau profonds (2 à 10 m)
Surfaces jusqu'à 8 000 m² selon profondeur et forme
Plans d'eau stratifiés en été, avec vase et manque d'oxygène au fond
En schéma
Caractéristiques techniques
Surface indicative
Jusqu'à 8 000 m²
Profondeur d'eau
2 à 10 m
Compresseur
SAD 120, 120 L/min
Alimentation
230 V / 50-60 Hz, 500 W, câble 10 m
Diffuseurs
2 x SubFlo Diffuser D (EPDM, jusqu'à 9 000 L/h d'air chacun)
Tuyau de rive
Tubing L 30 m, Ø 12 mm, anti-UV
Tuyau lesté
Tubing H 30 m ou 150 m, Ø 8 mm
Eau
Eau douce uniquement
Dans le colis
1 x SubFlo Base 2 D (compresseur SAD 120)
2 x SubFlo Diffuser D
1 x SubFlo Tubing L 30 m
1 x SubFlo Tubing H 30 m ou 150 m (selon variante)
Le conseil de nos experts
Les zones les plus profondes, là où l'aération est la plus utile, sont souvent loin de la rive : mesurez la distance jusqu'à chaque diffuseur avant de choisir entre 30 m et 150 m de Tubing H. Vérifiez aussi le KH : en dessous de 7 °dH, minéralisez d'abord avec du Nautex.
The OASE SubFlo 2 D package includes all the equipment needed to aerate deep bodies of water from 2 to 10 m deep, up to 8,000 m² depending on their depth and shape. A base installed on the bank, 2 diffusers placed on the bottom and the tubing to connect them: you receive a complete, cohesive and ready-to-install system.
Weighted SubFlo Tubing H – from the bank to the diffusers: 30 m or 150 m
1
179.53 € / 863.42 €
179.53 € / 863.42 €
Total for items purchased separately
3,926.09 € (30 m) / 4,609.98 € (150 m)
Package price (– 5%)
3,728.95 € (30 m) / 4,378.95 € (150 m)
By choosing the package, you save 5% compared to purchasing the items separately.
How the installation is organized
Schematic diagram: Tubing L in orange; lengths of Tubing H to each diffuser in grey.
The base on the bank: the SubFlo Base 2 D is installed dry, near a 230 V outlet. Its SAD 120 compressor delivers up to 120 L of air per minute, continuously.
From the base to the water's edge: Tubing L. UV-resistant and low-friction, it carries the air from the base to the edge of the pond, up to 30 m.
From the water's edge to the diffusers: Tubing H. Weighted, it sinks on its own and stays on the bottom. The roll is cut into one length per diffuser, adapted to the distance of each.
On the bottom: 2 SubFlo Diffuser D, delivered empty and weighted on site with gravel or sand. Their ultra-fine bubbles oxygenate the bottom and mix the entire water column.
30 m or 150 m of weighted tubing?
Option
For whom?
Length per diffuser
Tubing H 30 m
Diffusers placed near the edge
About 15 m each
Tubing H 150 m
Diffusers to be placed far from the bank, in the center or in the deep areas
About 75 m each
The deepest areas, where aeration is most useful, are often far from the bank. Not sure? Send us a plan, we will calculate the distances.
Why aerate from the bottom?
In summer, a deep body of water separates into layers: warm, oxygenated water on the surface; cold water at the bottom that becomes depleted in oxygen. Organic matter decomposes poorly there: sludge accumulates, gases such as hydrogen sulfide and methane form, and the released nutrients fuel algae growth. By injecting air at the bottom, SubFlo breaks this stratification: oxygen reaches where it is lacking and the bacteria that digest organic matter regain good working conditions.
The SubFlo system in video
Installation specifications
Specification
SubFlo 2 D package
Indicative surface area
Up to 8,000 m² (depending on depth and shape)
Water depth
2 to 10 m
Compressor
SAD 120, up to 120 L/min, continuous operation
Power supply
230 V / 50-60 Hz, 500 W, 10 m cable
Aeration points
2 SubFlo Diffuser D diffusers (EPDM, up to 9,000 L/h of air each)
Tubing
Tubing L 30 m (Ø 12 mm, UV-resistant) + Tubing H 30 m or 150 m (Ø 8 mm, weighted)
Water
Freshwater only (neither swimming pool nor seawater)
Have our experts validate your installation
Before ordering, send us the surface area, maximum depth and a plan or photo of your body of water to support@foudebassin.com, or call +32 (0)10 86 03 54. We will check that the package is suitable, advise you on the placement of the diffusers and the length of tubing to allow for. Our team has been supporting body of water managers since 1998, and travels to Belgium and France to assess your body of water.
For a long-term healthy body of water
Aeration creates the conditions; bacteria do the work. Combine SubFlo with Aquipond Bactovase to digest accumulated sludge, and check the KH of the water: if below 7 °dH, mineralize first with Nautex.