E245-S Spray Contact Adhesive - SealEco

Manufacturer data (SealEco).

High-performance yellow adhesive based on synthetic polymers and solvent (non-chlorinated). Designed for the fast and easy bonding of EPDM membranes to concrete, wood, metal and other acceptable substrates.

Directions for use: 
The materials to be bonded must be dry, dust-free and degreased. Then, spray the contact adhesive evenly on both surfaces to be bonded. The ideal distance between the surface and the spray gun is 30CM. Apply, preferably, the adhesive bands without overlapping. After 2 to 4 minutes, bond the two surfaces together and smooth and press firmly.

If the sprays overlap, the open time must be doubled at minimum. If the surfaces are very porous, carefully check that there is sufficient contact between the two layers of adhesive. If necessary, apply an additional layer. Check the installation manual and safety data sheets before use. 

Storage: between 5°C and 20°C in the shade, shelf life 24 months.