CTX 551C WinterStar Power 1L - Treats up to 100M³ - Pool Winterizing Solution CTX

Description du produit :

Winterizing product. Algicide, bactericide, and anti-scale, without copper sulfate and non-foaming. Compatible with all types of treatments. 0.5 L / 40–50 m³ or up to 100 m³ with 1 bottle.

• Prevents the proliferation of algae and bacteria
• Non-foaming
• With measuring bottle, easy to use

Product for maintaining water in optimal conditions in outdoor pools during the winter period. In active or passive winterizing, it prevents intense proliferation of algae, bacteria, and the formation of lime sediments. Compatible with all types of disinfection treatments and all types of filters, Winter Star Power does not generate foam. Fully soluble in water and free of copper, it does not stain pools with liner, reinforced PVC, or polyester coatings.

Highly concentrated product, it will facilitate restarting the pool in spring. ctx552 is more environmentally friendly because less raw materials, packaging, and energy are used in its production.

INSTRUCTIONS FOR USE

The bottle has an integrated dosing cap which allows exact control of the product used. Safer and easier to handle, it does not come into contact with the chemical product. Always adjust the pH before adding chlorine to the water to make the treatment as effective as possible. Pour the necessary dose of product directly into the pool water. Turn on the filtration long enough to achieve good dissolution of the product in the water. STEP 1: Hold the bottle upside down so the dosing cap can be filled. STEP 2: Unscrew the bottle cap. STEP 3: Empty the dosing compartment. "SPECIFIC USE": For a specific volume, tilt the bottle and determine the desired dose.

DOSAGE

At the end of the swimming season, when the water temperature is below 15 degrees and without having stopped the maintenance treatment, perform a super chlorination with ctx200gr or ctx250 ClorShock (30 g / 2m³). The next day, with the water pH value between 7 and 7.2, pour 1 L of product per 50 m³ of water. It is recommended to repeat the product addition in the middle of the winter season. This dose is indicative and may be adjusted depending on the characteristics of each pool, weather, etc.