Monitor and automate your pond: temperature, water level, remote controls

A well-monitored pond is a pond that causes few problems. Some measurements lend themselves very well to automation; others still require a human eye. Here is how to stay organized.

Temperature, the basic indicator

It controls everything: the fish's appetite and the type of food, bacterial activity, when to start a treatment, the risk of oxygen deficiency in summer. A simple floating thermometer, checked at a fixed time, is enough.

Water level

Evaporation, waterfall splashes, a small leak: the level drops. However, a level that is too low causes skimmers to suck in air and can cause a pump to run dry. A level controller opens a solenoid valve and automatically replenishes the water.

Control pumps, UV and lighting

• Remote-controlled outlets: turn on the lighting, cut the waterfall or UV without opening the box.
• Variable flow: compatible pumps can be adjusted remotely to lower consumption at night or in winter.

What you should continue to measure yourself

pH, KH, ammonia, nitrites, nitrates: regular tests remain the standard for garden ponds, especially in spring, after a filter change, or in the event of abnormal fish behavior. See our article on ammonia and pH.

Electrical safety first

All pond equipment must be protected by a suitable residual current circuit breaker and installed according to regulations. Read our guide on electrical installation for your garden pond and call an electrician if in doubt.

Want to control your pond remotely? The Foudebassin team is here to help: contact us, or come see our equipment in operation in our aquatic garden center.