The bottom drains allow for discreet and efficient installations. These can be placed on any type of support: EPDM tarpaulin, PVC tarpaulin, polyester, concrete, etc. There are many types of bottom drains, usually these are provided with watertight flanges and can be easily connected with their PVC fittings. Inform yourself about the choice of the main drain, its diameter and how to install it.
Drain with protective cap, to prevent fish from getting in and ensure good suction. The reinforced model bottom drain has an off-center outlet ...
View full detailsDrain with protective cap, to prevent fish from getting in and ensure good suction. 50 mm: round 20 cm and round lid 22 cm
Reinforced model of bottom drain fitted with a cover with EPDM rubber membrane (type 1) for the aeration of ponds, bodies of water and garden ponds...
View full details110 mm bottom drain fitted with a cover with rubber membrane for aeration of ponds. The cover has a diameter of 38 cm (pneumatic membrane Ø 34 cm)...
View full detailsVery convenient way to equip ponds without a bottom drain with a bottom drain with a 110 mm pipe! Fitted with a special 110mm elbow with a 32mm h...
View full detailsVery convenient way to equip ponds without a bottom drain with a bottom outlet using a 50 mm pipe! Equipped with a special 50mm elbow with a 32...
View full detailsCan be used as a main drain or wall passage. Pressure PVC elbow has been welded to the ABS passage. A solution that saves you space. Almost no he...
View full detailsIdeal for swimming ponds for example! Thanks to the robust edge, presents little risk when a person steps on the lid. The weight is distributed by...
View full detailsManufactured in Europe, our main drains with 50/63 mm outlet to be glued benefit from the latest technological innovations, which give them a guara...
View full detailsBottom drain Ø 270 mm with plastic grid Code 915 In white ABS, with 2" side outlet that can be closed from the inside to control the pressure. 1 ½"...
View full details
