To ensure your pool functions properly, it is essential to have a technical room. This is a space that will be used to store equipment, tools, and other products for pool maintenance. The pool's water circuit and its purification depend heavily on this technical room.

As you might expect, the layout of this outbuilding must comply with certain rules as well as electrical standards. In this article, we help you organize this room in a detailed and thoughtful way.

⭐ You might also be interested in: our collection of kit pools

Observe the correct configurations for the technical room

Having a pool is a significant asset for a home, especially when the sunny days arrive. But for the pool to be functional, the technical room must meet certain criteria. Whether for technical reasons or for ease of regular maintenance, optimizing the technical room is highly recommended.

Do not hesitate to inquire about existing standards for technical rooms and pools in general. On one hand, this will help you organize more effectively. At the same time, it will also allow you to anticipate a good number of future interventions.

Finally, for the beauty and aesthetics of your outdoor space, you can take inspiration from stylish models adapted for technical rooms. In this case, we can find ideas such as the example proposed here.

Floor, waterproofing, and security of the technical room

One of the first elements to consider is the floor. For good reason: it is very important that the room is watertight, while being perfectly ventilated. You should also ensure that the shed or outbuilding is well-lit and presents no risk of flooding. In general, we recommend installing the technical room on a flat surface.

⭐ You might also be interested in: we help you choose outdoor sockets suitable for your ponds and gardens

On the other hand, we advise you to ensure that you install a door and keep the room locked at all times. As the area will be used to store maintenance and treatment products, it is important that it is not accessible to children or animals.

Preparing and optimizing the technical room for access and maintenance

The ideal approach is to establish a plan beforehand, taking into account both current and future needs. This will allow you to determine the precise surface area and size adapted to the pool's technical room. Of course, to do this correctly, you must respect the flow direction of the pool water.

When setting up the technical room for the pool, take care to install equipment in the most optimal way. Once again, this will allow for easy access to all components. This notably means clearing as much space as possible so that setting up and maintaining the devices is simple and safe.

Pay attention to the positioning of each element

Once you know the characteristics of your pool's technical room, it is time to proceed with the installation of the equipment.

For your pool to function, the water passes:

• through the pump
• then through the filter, where it is stripped of its impurities
• before being sent back into the pool

It is therefore important that the pool pump is installed as close as possible to the pool and the water level. We recommend a maximum distance of 10m. As for the filter, it must comply with the relevant regulations.

The tank itself should be accessible to facilitate the maintenance or replacement of the filter element. If you have a booster pump, this is what should be placed at the beginning of the circuit, just after the electrical circuit.

Equipment such as sensors must be attached to the piping carrying water to the pool, after it has passed through the filter. They will thus be installed just after the filter and can be placed at a single point using a measurement chamber (if space is large enough). Finally, do not forget the heating system, which will be followed by the treatment elements.

Generally, specialists install a system that allows each element to be isolated in the event of a breakdown. Furthermore, the positioning of the elements in the pool's technical room concludes with the installation of the pH injection sensor. This comes just before the return nozzles.

⭐ You might also be interested in: our collection of pool pumps

The pool technical room in a nutshell

As you will have understood, successfully laying out your pool's technical room is an essential step in building your pool. It is therefore important to think about it carefully and get help from a professional to facilitate the setup.

Do not hesitate to draw up a plan based on the equipment and accessories you plan to use. This will allow you to choose the right size and configuration for your room and take the opportunity to have a technical area that is both stylish and functional.

⭐ You might also be interested in: we help you choose your garden pond

Do you have any other questions? Do not hesitate to ask them in the comments or by sending us an email! We would be delighted to help you!

In the meantime, you can find our collection of pool pumps and filters here: