The supply of electricity to the basins is a question that seems trivial. However, many errors are made, including for example the use of power strips which should only be used inside buildings. Even if you put your power strip in a plastic bag, it will give you problems in the short to medium term.

The Inscenio range from Oase is designed for the electrical installation of outdoor pools

Now let's see how to set up electricity in your garden to power your pumps, filters, etc. The Inscenio range from Oase is designed for the outdoors. Even in the rain.

This is a four-outlet multi-socket box. The advantage of the system is that it is very easy to position in your garden. You have a small stake supplied with the box to stabilize the power strip box plus a plastic cover to protect the box.

Inside the box, there is a notch that allows you to jam the electric cable so that if you trip over the cable, you won't tear off the sockets.

The advantage with the Inscenio electrical installation system for ponds from Oase, you can also have a remote control. It depends on the ranges.

So you have the Inscenio 230 system without remote controls, with 4 sockets. You also have the FM-Master 1, 2, and 3 Le 1 system with two controlled sockets and two non-controlled sockets. The 2 is three controlled sockets one non-controlled socket.

The FM-master 3 is three controlled sockets. The third socket ordered has a dimmer on it and a permanent socket. The dimmer function is a power regulation allowing to decrease or increase the intensity of the current for fountains and lights etc.

Finally, Oase also released the Wlan EGC system a few years ago. It is a system with controllable sockets. You will be able to control the system from your smartphone either from your home or even from your second home, depending on the cloud model, or Wlan. You will be able to control the EGC system, that is to say the EGC pumps and the EGC filters, wherever you are. It's very useful.

The current in the garden theoretically must be connected to a differential of 30 ml amps, it is for your safety, it is legal. To connect the system, there is a female cable. The connection is made in the box and a plastic cover is finally placed there, which will protect the complete box.

You can also for an aesthetic effect, hide the complete box with a dummy rock. These proposed means will therefore be able to improve the aesthetics of electrical installations, their control and safety. If you need more information, don't hesitate to leave a comment.