How to connect a secoh air pump?
How to connect a SECOH air pump? Most air pumps are equipped with a rigid outlet (and flexible optional) for connection with a 20MM inner hose.
For connection to an air pump, it is advisable to reduce the pipe as late as possible for flow loss. To size the diffusers to an air pump, it is quite simple.
If the pump is a JDK20, it is a 20L/M. If it is a JDK80, it is 80L/M. Once you know the flow rate, you will need the same capacity in diffusion to prevent the pump from overheating.
So, if I have a JDK20, I will use a 20L/M diffuser (you can find them here and select the flow rate on your left ). Then, you will need a one-way tap ( SC214 ), which you can find by clicking here .
If you have a JDK80 , you could for example use a 4-way tap, with one way to a 50L/M, and the other three to 10L/M. This is a setup that you assemble as you wish, as long as the sizing is respected and the pump delivers all the air it will produce.
A question? Contact our team via support@foudebassin.com
Les produits conseillés par nos experts
Voir toute la sélection
Aquipond BactoClay - Montmorillonite clay 2 kg for koi ponds
€39,95
Voir le produit
Minerall in One Aquipond - Increases GH & KH simultaneously - 2.5KG to treat 30M³
€49,00
Voir le produit
Sera Aqua-Test Set - The essential analysis kit for ponds and aquariums
€34,61
Aquipond KH+ 1kg - Increases Carbonate Hardness (KH)
€19,95
À lire aussi
Tous les conseils
Garden fountain: how to choose the right one (freestanding, in the pond, solar-powered, or statue) and where to find it
6 min de lecture
Arrosoir & Persil: recycled metal garden decor, choosing and installing
12 min de lecture
38 or 50 mm hose for a pond pump? Choose the diameter based on the flow rate and length
9 min de lecture
Comments
Leave a comment