Griffon lubricant P-20 - 800G - Griffon

Lubricant for the assembly of pipes, sleeves and couplings with rubber sleeves (sliding sleeves) in pressure systems and flow systems.

Application domain

• For joining pipes, sleeves and fittings with rubber sleeves (sliding sleeves) in pressure systems and flow systems.
• Approved for drinking water systems based on toxicological and bacteriological properties.
• Suitable for PVC-U, ABS, PE, PP, FRP, concrete and coated cast iron.
• Suitable for all diameters.

Properties

• KIWA certificate
• KIWA-ATA
• ACS
• WRAS
• Correctable
• Acid free
• Thixotropic
• Rinsable with water

Quality seals/KIWA standards

• KIWA: Lubricants for rubber sleeve fittings. K5165 certificate based on BRL K535.
• KIWA-ATA: Approved for potable water systems.
• WRAS: Approved for potable water. WRAS certificate (BS 6920).

Preparation

• Application conditions: Do not apply at temperatures below 0°C.

Manual:

1. Cut the pipes square, bevel and deburr.
2. Remove dirt and moisture.
3. Apply the lubricant to the end of the tube and to the rubber sleeve.
4. Assemble the fitting directly by sliding the tube into the sliding fitting until it stops. The connection remains correctable for a few hours. Close the packaging tightly immediately after use. Stains/residues: Remove stains with water.

Technical specifications

• Basic Raw Material: Fatty Acid
• White colour
• Viscosity: Pasty
• Density: Ca. 0.9 g/cm³
• Storage conditions At least 12 months, stored in tightly closed packaging in a dry place at a temperature between +5°C and +25°C. Limited shelf life after opening. Store in a tightly closed container in a dry place, at a temperature between +5°C and +25°C.