Aquipond ClearWater 25M³ - Works effectively on green water - Instant clarifier

ClearWater Aquipond Treatment - Against green water in ponds. Before using this solution, carry out a water analysis, and especially the KH & GH.

• Removes phosphorous, impurities and suspended matter from water
• Powerful water clarifier - Optimization of mechanical filtration

Aquipond Clearwater quickly clarifies cloudy water (brown, green or whitish) by permanently binding suspended matter in the water and phosphates. The aggregates thus obtained are effectively retained by the filter and the pond takes on a crystalline appearance never obtained before. Harmless to flora and fauna. Be sure to keep the filtration, aeration and mixing of the water running during the CLEARWATER treatment.

Instructions for use: Ensure that filtration and aeration are in good condition. Allow a period of 10 days between 2 treatments. Before treatment, slow down the pump and stop aeration to allow sedimentation. Calculate the precise dose based on the volume and dilute this dose at least 10 times with water before spreading it over the entire surface of the pond (watering can).

Remove any waste that accumulates at the bottom or on the surface and restart the pump, always taking care to ventilate well. Warning: It is possible that large quantities of debris may be retained in the filter or in the vases. It will be necessary to clean the filter and re-seed with Optinit. The completely normal increase in bacterial activity that follows can cause a decrease in the oxygen level, which is dangerous for the fish. Therefore, it is necessary to avoid treatment if the dissolved oxygen level is too low (high heat, storms, non-compliant installations, etc.).

Precautions: Toxic if swallowed. Irritating to eyes and mucous membranes. Keep out of reach of children and pets.

When applying Aquipond Clearwater, it is possible that significant accumulations of organic matter may be captured in the filter or at the bottom of the ponds. This situation can lead to a normal increase in bacterial activity, which can temporarily reduce the oxygen level in the water, potentially posing a health risk to fish.

It is therefore crucial to ensure that the filtration and aeration system is working optimally before using the product. Furthermore, it is recommended to avoid applying the treatment when the level of dissolved oxygen in the water is already low, as may be the case during periods of high heat or just after a storm.