The EB series bead filters feature a highly robust PE body and are equipped as standard with a bottom drain for removing dirt, a 6-way valve, a transparent lid, beads and a highly reliable blower (equipped with a noise limiter).
- The EB series comprises 6 models for ponds of approximately 10,000 to approximately 100,000 litres.
- The large lid provides excellent accessibility for topping up the beads and, if necessary, carrying out maintenance.
- The filters are supplied with beads included.
-
WARNING : maximum operating pressure 1.2 bar (12 metres). Bead filters are also ideal for swimming ponds! They guarantee crystal-clear and healthy water!

Bead filters are closed (pressurised) systems filled with several million plastic beads (the “beads”). Since these beads float in the water, they provide mechanical filtration. In addition, thanks to their large adhesion surface, they also provide biological filtration.
-
Mechanical filtration: the beads float in a closed tank and are in close contact with one another. Pump pressure forces the water through the beads, causing impurities to adhere to them. Over time, a biofilm (a sticky layer) forms around the beads, trapping ultra-fine impurities.
-
Biological filtration: the plastic beads have an adhesion surface of approximately 1600 m² (six times greater than a blue Japanese mat). The film around the beads therefore offers bacteria a huge contact surface for decomposing ammonium and nitrite.
Which Econobead for my pond?
Unlike most multi-stage filtration systems, it is not only the volume of the pond but also the (future) fish population that matters when choosing an EconoBead filter. Too often, the significant growth of koi and the increase in their population are not taken into account. With multi-stage systems, a large area must therefore be reserved to install the filter, whereas the dimensions of EconoBead filters hardly differ from one model to another, because it is primarily the quantity of filter material (the number of beads) that matters.
The largest model requires no more than one square metre. We therefore recommend that you first check the (future) fish population of your pond in the model table, and then the volume of your pond. For ponds and pools without koi, we recommend multiplying the pond volume indicated in the table by two.
Which pump for an Econobead filter?
Since EconoBead filters are pressurised filters, the pump must be installed upstream of the filter. In general, pool pumps are suitable, as are certain pond pumps with a delivery head of at least 6 to 7 metres. Do not forget to take into account the head loss caused by the filter and the pipes. Make sure that the pump can still achieve a pumping flow rate equal to half the pond volume per hour against a resistance of 0.2 - 0.3 bar (2 to 3 metres). When using the EconoBead Bypass system, it is possible to use pumps with lower pressure, which allows significant savings on electricity costs!
Only for ponds?
No, EconoBead filters are also perfectly suitable for freshwater or saltwater aquariums and have proven highly effective for swimming pools.
Econobead ByPass system
The bypass system allows energy-efficient pumps to be used. Thanks to a very compact bypass system, the 6-way valve is completely bypassed during filtration, and the water enters and exits the filter in a straight line. Head loss is therefore reduced by at least 30% (depending on the type of pump). The bypass system is very easy to install thanks to the threaded connections.
- Connections: EB40/50/60: 50 mm. EB100/140: 63 mm.
Operating and maintenance instructions
Technical specifications
| Model |
EconoBead EB100 |
| Valve |
6-way 2" |
| Connections |
63 mm |
| Bypass system |
Included |
| Beads |
Included |
| Max. operating pressure |
1.2 bar (12 metres) |
| Brand |
AquaForte |
| Reference |
SK526 |
| EAN |
8717605078588 |