Vitii Calci 5 L - Calcium-based mineral solution

Calcium-based mineral solution

Vitii Calci increases the total hardness of the water. Rainwater lowers the total hardness, while evaporation (sun and wind) will have the effect of concentrating it. A value that is too low is detrimental to filtration. Regularly check the mineral balance of the water, especially after heavy rain and during periods of drought. Correct if necessary. Due to its composition, Vitii Calci promotes water filtration and clarification

Instructions for use :

1. Remove the faucet from the “Bag-in-box” pouch through the pre-cut hole in the box. Remove the safety tab on the faucet.

2. Place the bag-in-box cardboard on the shelf of the Vitii “automation” panel in the corresponding location. See color code.

3. Slide the faucet into the matching connector. Snap the connector back onto the faucet and turn the screw on top of the connector 1⁄2 turn (clockwise) to lock the connector onto the faucet.

4. Ensure that the 4 bag-in-boxes of your Vitii filtration are correctly positioned on the “Automation” panel.

Vitii Calci is to be used continuously with the Vitii filtration system. As soon as filtration starts, when the water temperature exceeds 12°C (spring, new installation, etc.), and after measuring and possibly adjusting the water parameters (see procedure for starting a Vitii bio-mineral filtration system). To be used exclusively with the entire range of Vitii biomineral filtration balance products ( Bacteri+ / pH-i / Carboni ).

Startup : Check and correct if necessary the mineral balance of the water before starting the “automation” module of your Vitii filtration.

Interview : automatic with Vitii filtration. 1 liter of Calci in 30m3 increases the overall mineral concentration by 10mg/liter.

Storage : Store at room temperature. The product has a shelf life of 24 months. After opening (put into service), the product has a shelf life of 12 months. Store in its original packaging.