JBL PROFLORA CO2 PROFESSIONAL SET U Professional CO2 fertilization system, with automatic CO2 and pH control and with disposable bottle.

• CO2 fertilization system with automatic CO2/pH regulation for optimal supply to all plants in freshwater aquariums from 40 to 600 l, thus preventing algae. The pH electrode must be purchased new as an addition.
• Easy assembly: screw the regulator onto the bottle, connect the solenoid valve to the CO2 controller, to the hose with bubble counter/non-return valve and to the reactor. Connect a pH electrode (not supplied). Setup CO2/pH controller - done
• TÜV-approved single-use bottle. No slipping of the hose thanks to the screwed hose connections, non-return valve preventing water from entering the bottle. Pressure gauges displaying the pressure in the cylinder and the working pressure.
• The CO2/pH controller measures the pH (CO2 dependent) with the pH electrode (not included) and automatically regulates the CO2 supply via the solenoid valve, until the ideal pH is reached with the right amount of CO2.
• Contents: 500 g single-use CO2 bottle, pressure reducer with solenoid valve, CO2/pH controller, 3 m hose, bubble counter with check valve, TAIFUN CO2 reactor with extension kit, 2 x 100 ml fertilizers and a fertilizer daily 10 ml.

Plants provide the aquarium with oxygen which is of vital importance for its inhabitants, they prevent the appearance of algae and eliminate problematic substances. The JBL fertilization system supplies plants with CO2, their main nutrient, via water. Plants absorb it and, with the help of light, convert it into sugar and oxygen during photosynthesis.

Easy installation / The system is completely ready to connect. Screw the regulator onto the CO2 bottle and connect it via the pipe with the bubble counter (with non-return valve), then with the reactor in the aquarium. The CO2 thus arrives in the aquarium and dissolves in the water using the reactor.

The solenoid valve is controlled by the CO2 controller and releases CO2 only when the pH is too high (pH is CO2 dependent). In this way, there is always the ideal amount of CO2 in the water.

With temperature probe, modern touch screen, probe check at each calibration, error diagnosis in the event of failure, permanent display: current pH/setpoint, probe voltage, temperature, calibration reminder in d/h, status of the solenoid valve, measurement accuracy, setpoint adjustment: free selection or automatic calculation by auto pH, autom. temperature during measurement and calibration, free hysteresis (deviation above or below the switch-on point), password lock, pH alarm (mains alarm), temperature alarm (mains and target alarm), valve status eligible, choice of language: D/EN/F/NL/I/DK/E/P, reset function, universal power supply suitable for all common network voltages in the world.

pH Electrode / A pH electrode is NOT included in the kit and must be purchased separately. You are thus guaranteed not to get an expired electrode in the kit, but to always have one straight from the factory!