The Aquipond duo for cleaning and then biologically rebalancing your pond up to 100 m³. Boost & Clean helps loosen and bring accumulated organic waste to the surface. A few days later, Bacto Maintenance Pro takes over to accelerate its biodegradation and sustainably support the pond’s biological balance.
✅ Cleans the bottom and dirty areas
✅ Helps bring organic waste to the surface
✅ Gradually reduces sludge and organic matter
✅ Supports and strengthens bacterial activity
✅ Ideal for koi ponds, lakes, and large bodies of water
Boost & Clean + Bacto Maintenance Pro Pack – The complete treatment for your pond
As the season progresses, leaves, leftover food, fish excrement, and other organic matter gradually accumulate in the pond.
The problem? This waste does not disappear on its own. It eventually forms deposits, contributes to sludge, clogs the filtration system, and consumes some of the available oxygen.
That is precisely why we have combined Aquipond Boost & Clean and Aquipond Bacto Maintenance Pro in a single pack.
A simple 2-step method:
1️⃣ BOOST & CLEAN: loosen and clean
Boost & Clean acts quickly on organic matter accumulated at the bottom, on the walls, among stones, in planted filter areas, and in less-circulated zones.
Its active oxygen content helps to:
- loosen some of the organic deposits;
- encourage them to rise to the surface;
- improve oxygenation in dirty areas;
- reduce the pond’s organic load;
- prepare the environment for bacterial action.
Some of the waste may rise to the surface: remove it with a net or let your skimmer collect it.
Every piece of waste removed is pollution that will no longer return to the bottom of your pond.
2️⃣ BACTO MAINTENANCE PRO: the bacteria take over
After this initial cleaning phase, Bacto Maintenance Pro provides a high concentration of selected bacteria.
They naturally continue the process by promoting the biodegradation of residual organic matter and strengthening biological activity in the pond and its filtration system.
Bacto Maintenance Pro helps to:
- break down the organic waste still present;
- gradually reduce deposits and sludge;
- support biological filtration;
- limit nutrient accumulation;
- improve the biological stability of the water;
- keep the pond cleaner over time.
Its concentrated formula is particularly suitable for heavily used ponds and large volumes.
Why combine the two products?
Using only a cleaning product helps put some of the waste back into circulation.
Adding bacteria afterward takes the process further.
Boost & Clean prepares the ground. Bacto Maintenance Pro continues the work biologically.
This is precisely the principle behind the successful Biobooster + Bactogen combinations: an intensive initial treatment followed by long-lasting bacterial maintenance.
🚀 BOOST
Loosening deposits + supplying active oxygen.
🧹 CLEAN
Rising and removal of some of the organic matter.
🦠 BACTO
Biological breakdown of residual matter.
🌿 MAINTENANCE
Maintaining effective biological activity over time.
What does the pack contain?
1 × Aquipond Boost & Clean 2.5 kg - 100M³
Size intended for treating a large pond of up to 100 m³.
1 × Aquipond Bacto Maintenance Pro 1 kg - 100M³
Ultra-concentrated bacteria to extend the cleaning process and ensure biological pond maintenance.
How do you use the pack?
Day 1 – Boost & Clean
Distribute Boost & Clean evenly over the pond’s surface when the water temperature is above 15 °C.
Keep the filtration system and, above all, good aeration running.
In the following hours, organic matter may gradually rise to the surface.
👉 Remove it regularly using a fine-mesh net or a skimmer. A light foam or temporary cloudiness may appear; this is normal.
A few days later – Bacto Maintenance Pro
When the initial cleaning action is complete, add Bacto Maintenance Pro so that the bacteria can take over and continue the biological breakdown of the remaining organic matter.
For Bacto Maintenance Pro, the instructions recommend activating it in approximately 5 litres of pond water for 2 to 3 hours before distributing it. The stated minimum operating temperature is 10 °C.
When should you use this pack?
🍂 After a period of falling leaves
🌱 When restarting the pond
🧹 When deposits appear on the bottom
💧 When the filtration system clogs quickly
🌿 When the stones and walls become slippery
🐟 In a heavily fed koi pond
♻️ Occasionally during the season to clean up the pond
Foudebassin’s advice
Do not let the waste that has risen to the surface sink back down.
Boost & Clean is specifically designed to make some of this matter easier to collect. Use a net regularly during the first few hours and over the following days.
Then let Bacto Maintenance Pro continue working deep down.
It is this combination of mechanical cleaning + oxygenation + bacterial activity that delivers a much longer-lasting result than a simple clarifying product.
