Skip to content
ÉCONOMISEZ 10% SUR VOTRE PROCHAINE COMMANDE AVEC LE CODE CLEARWATER2024 - VALABLE JUSQU'AU 1ER MAI✨
ÉCONOMISEZ 10% SUR VOTRE PROCHAINE COMMANDE AVEC LE CODE CLEARWATER2024 - VALABLE JUSQU'AU 1ER MAI✨
Comment fabriquer des bactéries pour le bassin ?

How to make bacteria for the pond?

How to make bacteria for your pond? The pool is an aquatic environment that must be maintained regularly. Moreover, it is a micro-space of biodiversity where a wide variety of micro-organisms live.

Thus, the presence of bacteria is essential to ensure the biological balance of the pond. So how do you promote the development of good bacteria in an enclosed aquatic environment? This is what we will see in this article.

Maintenance, an important practice for the good health of the basin and its inhabitants

Why make bacteria for your pond?

Bacteria are microorganisms that perform several functions. Their effective action begins with the degradation of organic matter that accumulates in your pond. They transform waste products of plant or animal origin into nutrients such as potassium, phosphorus and nitrogen.

In this way, the bacteria reduce the pollution caused by the proliferation of algae and the accumulation of silt. Similarly, they reduce the amount of pathogens such as Escherichia , salmonella or coliforms.

The bacterium Escherichia | ©️ Wikipedia

Making bacteria for your pond: instructions for use

starter bacteria

To create a new ecosystem in your pond, all you have to do is install “starter” bacteria. This installation is done simply by pouring a product containing bacteria into your pond .

Products regularly used to integrate starter bacteria into a pond

In early spring, fill your pond with tap water and let it sit for two days. Once the chlorine evaporates, check its temperature, hardness and pH. Well-oxygenated water must be over 10 degrees, a KH of 8, a GH of 14 and a pH of 7.

It may interest you :  our guide to analyze your pond water

Basin oxygenation

To oxygenate your pond and facilitate the development of pond bacteria, we recommend that you select an aeration kit adapted to your water volume .

The complete Secoh aeration kit for ponds up to 20 cubic meters

Nitrifying bacteria

Finally, pour nitrifying bacteria in liquid form into your pond. You will find containers of different capacities in garden stores. For a new pond, count 1 liter of liquid bacteria for 10 cubic meters of water.

The EcoTreat Nitrifying Bacteria Starter Pack

When to add bacteria to your pond?

To maintain your pond over the long term, you need to add maintenance bacteria . The easiest way is to spread powdered bacteria over the entire surface of the pond.

Repeat this operation once a week to treat the new water. Then, add it once every two weeks during hot weather.

When water ages, its biological balance stabilizes. Therefore, the addition of bacteria becomes less and less useful. On the other hand, if you notice that the water changes color, do not hesitate to test your water to see if it needs an addition of bacteria.

A basin with its water feature and its decorated banks

How to add bacteria to your pond?

To add powdered maintenance bacteria, you will need a bucket and an oxygenator. Take a bucket filled with water from the basin in which you place an oxygen diffuser. Mix 4 scoops of maintenance bacteria powder. Let this preparation rest for 3 hours.

Dehydrated bacteria become active under the action of water and oxygen. 

Pour the mixture over the entire surface of the basin at the rate of 4 spoons per 20 cubic meters of water. The accumulated impurities will disappear in a few days.

In addition, note that the action of bacteria is vital to safeguard the pond's ecosystem. Decaying organic matter, algae and silt can smother the biodiversity of an aquatic environment. However, the primary role of bacteria is to ingest all these pollutants. Then, they transform them into essential nutrients for the ecosystem of your pond. Finally, the action of bacteria also promotes gas exchange between water and air.

The different packaging of Bactogen dehydrated bacteria

How to keep bacteria out while cleaning the filter?

The action of the good bacteria cannot be sustainable if your filtration system is efficient. Indeed, the Nitrosomonas bacteria and the Nitrobacter bacteria constantly need oxygen to survive in stagnant water and filtration promotes oxygenation of the pool. This is why cleaning the filters is extremely important.

Caution: a filter should never be completely cleaned. Each cleaning must be done partially to save the good bacteria that cling to it.

So, for your pond to be a real asset to your garden, you have to know how to maintain it. So remember to monitor the quality of its water and regularly add good bacteria. This is how its balance will be guaranteed, in the long term.

A pond that adorns the garden and the entire property

For more information on the maintenance of garden ponds, visit our blog!

Previous article How do you prevent soil from mixing with water when preparing baskets of aquatic plants?

Comments

Robert Michel - March 21, 2023

Peut on mettre des bactéries en même temps qu une filtration avec lampe uv

Leave a comment

Comments must be approved before appearing

* Required fields